If you can put up a shelf, you can fit your shutters. They arrive semi-assembled — the frame slots together and the panels pin on — with every fixing you need, and most single windows take under an hour.
Lay everything out on a soft surface and check it against your order. Your shutters arrive semi-assembled — the frame to slot together, plus panels, hinges, magnets and fixings, all included.
Lift the frame into the recess (or against the wall for a face fit) and check it sits evenly. Pop in a few packers if needed so there are equal gaps all round.
Use your spirit level, then drill and screw the frame to the recess or wall through the pre-marked points. Take your time here — a level frame makes everything else perfect.
Slot each panel onto its hinge pins — they drop straight into place. Open and close each panel to check the swing is smooth.
Nudge the magnets so the panels close flush, tilt the louvres to test, and add the supplied trim/caps for a flawless finish. Stand back — you just fitted bespoke shutters.
Our full step-by-step fitting video walks through a real installation from start to finish, plus tips for trickier windows and bays.
Use the guide for your window type below — view it here or open the PDF to print it. Every order arrives semi-assembled — the frame slots together and the panels pin on — with all the fixings you need.
Pick your window and size — the preview updates as you go. No details needed.
Start with free samples or jump into the designer and see your price in minutes.
